|
Product |
Rate |
|
Comealong 2 Ton
JET 2-Ton Capacity 20' Heavy-Duty Lines Man Cable Puller
Heavy-duty cable puller designed to lift, lower, stretch or pull heavy loads
Drop forged hooks with safety latches standard
Complies with AN ... |
$13.39/minimum |
|
Engine Hoist Knockdown
Kaydee Knockdown Lifts can be quickly taken apart, moved and assembled. They go wherever the job is — backyard, shop, warehouse, office tower or construction site.
Kaydee Lifts use a swivel slip ... |
$25.00/minimum |
|
Hoists Hand and Chain
Heavy-duty hand chain hoist features impact-resistant, lightweight steel construction with durable powder-coat finish
Drop forged anchor plate prevents over travel at the hook's lowest position
Trip ... |
$29.93/minimum |
|
Impact Wrench 1/2 JET
Built-in air regulator for positive speed and torque control
Ring socket retainers for rapid socket changing
Front and/or rear bumper guards
For all models, air inlet (NPT) is 1/4" and air hose ... |
$17.33/minimum |
|
Impact Wrench Electric 1/2" Hilti
Good for those places where there is no air available, change tires, bkeak loose hard rusted bolts with out dragging that compressor out.
Technical Data
Input power 470 W
Max. torque 100 Nm
Weig ... |
$14.96/minimum |
|
Jack Bottle 20 Ton
b>JHJ Series Heavy-Duty Industrial Bottle JackFor lifting, pushing, spreading, bending, pressing or straightening requirements
Not affected by temperature extremes
Low profile truck models or standa ... |
$14.57/minimum |
|
Jack Handyman
Handyman Jack
Lifting nose is 4-1/2" long. 42" Model has 32" continuous lift; 48" model lifts 38"; 60" model lifts 50", all tested to 7,000 lbs. Cast steel for strength, rigidity, and durabilit ... |
$14.96/minimum |
|
Jack Hydraulic 12 1/2 Ton Bottle
Jet, 12-1/2 ton capacity, industrial hydraulic bottle jack, jet model #jhj-12-1/2, minimum height 9-1/2 inches, maximum height 18-1/2 inches, piston height 5-7/8 inches, for lifting, pushing, spreadin ... |
$13.00/minimum |
|
Puller Pitman Arm
Designed for most domestic cars and light trucks. Pressure screw size: 3/4"-16 x 6 7/8". Industrial finish.
|
$11.42/minimum |
|
Sockets 1/2"-3/4"-1" Drive Sockets
We carry a large variety of sockets and specialty sockets for any job.
please call for pricing
Way to many to list.....
|
call for rate |
|
Transmission Jack Car/Truck
Transmission jack has smooth hydraulic lifting and lowering. Saddle allows full side to side and front and back adjustment.
Key Specs Lift Capacity (lbs.) 1,000
Min. Lift Height (in.) 8 1/2
Max. ... |
$29.54/minimum |
|
Transmission Jack Large Truck
A full 2,200 pound handling capacity with a profile only 8-1/4 in. off the ground! That makes it perfect for getting under the newest style of low profile, aerodynamic trucks with wind-cheating fairin ... |
$46.07/minimum |
|
Transmission Jack Small Scis
Perfect for removing transmissions on smaller vehicles. Heavy duty steel construction with ball bearing easy-roll casters. Includes 2'' W x 43'' L nylon strap to secure the load. Works with any 1/2'' ... |
$17.72/minimum |
