|
Product |
Rate |
|
Auto Polisher/Sander, Electric
|
$15.00/minimum |
|
Axle Puller, Snap-On Tools - Axle Puller
Breaks axles loose on Ford and GM cars and light trucks with flange-type axles. Optional adaptors allow use on most cars. Includes housing, three removable jaws, 10 lb. slide hammer, and 1 1/2"-12 x 2 ... |
$12.00/Day |
|
Ball Joint Fork, OTC Tools (SPX/OTC) - Ball Joint Fork (#842)
Ball joint service is easier with this tool. It was designed to safely remove ball joints from spindle support arms, and can be used on a wide variety of vehicles, from compact cars to light-duty truc ... |
$10.00/Day |
|
Ball Joint Press
|
$20.00/Day |
|
Bearing Separator, OTC Tools (SPX/OTC) - Bearing Separator (#1124)
"Knife-like" edges to secure a gripping surface. Use with puller Nos. 1035, 1040, 1041, 1042, 1065, 1063, and 938.
|
$8.00/Day |
|
Clutch Alignment Tool, Snap-on, Inc. - A37M Clutch Aligner Set
Snap-on A37M Clutch Aligner Set
For vehicles with standard transmissions, including many import cars. Allows quick aligning for complete range of single disc clutches (16 collet sizes ranging from ... |
$12.00/Day |
|
Coil Spring Comp. (in or out)
|
$15.00/Day |
|
Compression Tester
|
$10.00/Day |
|
Cylinder Hone (stones available)
|
$8.00/Day |
|
Dent Puller
|
$10.00/Day |
|
Drum Puller
|
$12.00/Day |
|
Engine Hoist, BlueBird International - KD 1200
Kaydee Knockdown Lifts can be quickly taken apart, moved and assembled. They go wherever the job is -- backyard, shop, warehouse, office tower or construction site. For extra ease and portablitiy, all ... |
$24.00/minimum |
|
Flaring Tool, Cal-Van Tools - 163
Double Flaring Tool Kits
This 45° double flaring tool set is designed to withstand the high pressures necessary to double flare soft steel tubing, as well as, single flare soft copper, aluminum and ... |
$10.00/Day |
|
Floor Jack, 2 Ton Hydraulic
|
$15.00/minimum |
|
Floor Jack, 5 Ton
|
$20.00/minimum |
|
Harmonic Installer
|
$10.00/Day |
|
Harmonic Puller, OTC Tools (SPX/OTC) - Harmonic Puller Set (#7790)
Removes a wide variety of components having tapped holes, including harmonic balancers and timing gears.
Includes a variety of sizes of standard and
metric cap screws. Capscrews can be positione ... |
$10.00/Day |
|
Impact Wrench, 1/2" Drive, Elec. or Air
|
$10.00/minimum |
|
Jack Stand, Tool King U.S.A. Corp. - W41023
Tool King 6 - Ton Jack Stand
Features
Ratchet style for easy adjustments
6-Ton Capacity
15-1/2" to 23-1/2" Lift Reach
|
$4.00/Day |
|
MacPherson Strut Tool
|
$20.00/Day |
|
Piston Ring Compressor
|
$10.00/Day |
|
Pitman Arm Puller, Snap-On Tools - Pitman Arm Puller (#CJ119B)
Designed for most domestic cars and light trucks. Pressure screw size: 3/4"-16 x 6 7/8". Industrial finish.
|
$10.00/Day |
|
Ridge Reamer, Snap-On Tools - Ridge Reamer
Lathe-type reamer is for 3" to 5" diameter cylinders. Centers itself in cylinder.
|
$15.00/Day |
|
Tie Rod Fork, OTC Tools (SPX/OTC) - Tie Rod Fork (#7266)
This handy tool is multipurpose. It will remove camber adjustment sleeves on Ford pickups that have an adjustable camber. It’s also a separating tool for tie rods on medium- and heavy-duty trucks. A ... |
$10.00/Day |
|
Torque Wrench, 150ft./lb.
|
$12.00/Day |
|
Torque Wrench, 200 Ft/Lb, K-D Tools - 2953 1/2" Torque Wrench
1/2" Ratchet Dr. Flex Head Locking Ring Micrometer Torque Wrenches
These wrenches permit precise tightening of fasteners to manufacturer’s specifications. Micrometer-type setting adjusts by rotat ... |
$15.00/Day |
|
Transmission Jack, 1750 lb. Hydraulic
|
$30.00/minimum |
|
Valve Spring Compressor, "C" Type
|
$10.00/Day |
|
Waxer, Polisher (bonnets & polishers available)
|
$10.00/minimum |
|
Wheel Puller, 18" Snap-On Tools - Wheel Puller (#CG300)
Puller, Pressure Screw, 2-Jaw, 20-Ton, 9 1/2" max. reach
|
$12.00/Day |
|
Wheel Puller, 3"
|
$10.00/Day |
